Removal
System Cover
Identify the system cover highlighted in blue.
Using a flat head or a Phillips screwdriver, rotate the lock counter clockwise.
Lift the latch till the system cover slides back.
Hold the cover on both sides, and lift the cover away from the system.
Power Supply Units
Identify the power supply unit highlighted in blue
Press the release latch and slide the PSU out of the system by using the PSU handle.
Airshroud
Power interposer board
Identify the power interposer board highlighted in blue
Disconnect all the cables connected from the PIB to the system board.
Remove the screws securing the power interposer board (PIB) to the system.
Lift the board and slide it out at an angle to disengage the guide pins on the board.
Lift the board away for the system.
Install
Power interposer board
Identify the power interposer board location highlighted in blue.
Align the slots on the PIB with the guides on the system.
Install the screws to secure the PIB to the system.
Route the cables and connect it to the system board.
Airshroud
Power Supply Units
Identify the power supply unit location highlighted in blue
Slide the PSU into the system until the PSU is fully seated and the release latch snaps into place.
System Cover
Identify the system cover location highlighted in blue.
Align the tabs on the system cover with the guide slots on the system.
Push the system cover latch down.
Using a flat head or Phillips screwdriver, rotate the lock clockwise.