Removal
System Cover
Identify the system cover highlighted in blue.
Using a flat head or a Phillips screwdriver, rotate the lock counter clockwise.
Lift the latch till the system cover slides back.
Hold the cover on both sides, and lift the cover away from the system.
Air shroud
Identify the air shroud highlighted in blue
Holding the touch points, lift the cooling shroud away from the system.
Mini PERC Card
Identify the Mini PERC Card highlighted in blue.
Using a Phillips screwdriver, loosen the screws that secure the cable to the mini PERC card.
Holding the tab, lift the cable to disconnect from the mini PERC card.
Slide out the mini PERC card to disengage from the card holder on the system board.
Lift the mini PERC card out of the system.
Install
Mini PERC Card
Identify the Mini PERC Card location highlighted in blue.
Angle the mini PERC card to engage with the mini PERC card holder on the system board.
Lower the mini PERC card into place until the mini PERC card is firmly seated on the card holder.
Align the screws on the cable with the screw holes on the mini PERC card.
Secure the cable to the mini PERC card with the screws.
Air shroud
Identify the cooling shroud location highlighted in blue
Align the slot on the air shroud with the standoff on the chassis.
Lower the air shroud into the system until it is firmly seated.
System Cover
Identify the system cover location highlighted in blue.
Align the tabs on the system cover with the guide slots on the system.
Push the system cover latch down.
Using a flat head or Phillips screwdriver, rotate the lock clockwise.