Removal
Side Cover
Identify the side cover highlighted in blue.
Loosen the thumbscrews that secure the side cover to the system.
Slide and lift the side cover away from the system.
Fan Duct
Identify the fan duct highlighted in blue.
Press the retention tabs on both sides of the fan duct to release it.
Pull and remove the fan duct from the system.
DP Module
Identify the DP module highlighted in blue.
Remove the screws that secure the DP module to the chassis.
Disconnect the DP module cable from the connector on the system board.
Remove the DP module from the system.
Install
DP Module
Identify the DP module location highlighted in blue.
Insert the DP module into its slot from the inside of the system.
Connect the DP module cable to the connector on the system board.
Install the screws to secure the DP module to the chassis.
Fan Duct
Identify the fan duct location highlighted in blue.
Position the fan duct to align it with the slots on the computer chassis.
Press the fan duct until it clicks into place.
Side Cover
Identify the side cover location highlighted in blue.
Align the tabs on the side cover with the slots and place the side cover on the system.
Tighten the thumbscrews that secure the side cover of the system.