Removal
Base Cover
Identify the base cover highlighted in blue.
Loosen the captive screws that secure the base cover.
Pry the base cover near the hinges to release it from the system.
Lift the base cover off the palm rest assembly.
SSD (Solid State Drive) 2230
Identify the solid state drive (SSD) highlighted in blue.
Remove the screws that secure the SSD bracket on the system board.
Lift the solid state drive thermal shield off the system.
Slide and lift the solid state drive off the system.
Install
SSD (Solid State Drive) 2230
Identify the solid state drive (SSD) location highlighted in blue.
Slide the SSD into the slot on the system board.
Align the screw holes on the solid state drive bracket with the screw holes on the system board.
Install the screws to secure the SSD bracket to the system board.
Base Cover
Identify the base cover location highlighted in blue.
Align the base cover tabs to the slots, press the cover until it clicks into place.
Tighten the captive screws that secure the base cover to the system.