How to replace the Intrusion switch on a Optiplex SFFPlus 7020

This 3D experience gives you the step by step process of replacing the Intrusion switch and a Optiplex SFFPlus 7020. The procedure will also include removing the Side Cover and reinstalling them.

Removal

Side Cover

Identify the side cover highlighted in blue.

Slide the release latch until your hear a click.

Slide the side cover towards the back of the computer and lift it from the system.

Intrusion switch

Identify the intrusion switch highlighted in blue.

Remove the intrusion switch cable from the routing guides on the chassis.

Disconnect the intrusion switch cable from the connector on the system board.

Slide and lift the Intrusion switch away from the computer.

Install

Intrusion switch

Identify the intrusion switch location highlighted in blue.

Slide the intrusion switch into the slot on the chassis.

Route the intrusion switch cable through the routing guides on the chassis.

Connect the intrusion switch cable to the connector on the system board.

Side Cover

Identify the side cover location highlighted in blue.

Slide the side cover towards the front of the computer until you hear the release latch click.