How to replace the SSD (Solid State Drive) 2230 on a Precision 3490

This 3D experience gives you the step by step process of replacing the SSD (Solid State Drive) 2230 and a Precision 3490. The procedure will also include removing the Base Cover and reinstalling them.

Removal

Base Cover

Identify the base cover highlighted in blue.

Loosen the captive screws that secure the base cover.

Pry the base cover near the hinges to release it from the system.

Lift the base cover off the palm rest assembly.

SSD (Solid State Drive) 2230

Identify the solid state drive (SSD) highlighted in blue.

Remove the screws that secure the SSD bracket on the system board.

Lift the solid state drive thermal shield off the system.

Slide and lift the solid state drive off the system.

Install

SSD (Solid State Drive) 2230

Identify the solid state drive (SSD) location highlighted in blue.

Slide the SSD into the slot on the system board.

Align the screw holes on the solid state drive bracket with the screw holes on the system board.

Install the screws to secure the SSD bracket to the system board.

Base Cover

Identify the base cover location highlighted in blue.

Align the base cover tabs to the slots, press the cover until it clicks into place.

Tighten the captive screws that secure the base cover to the system.