Removal
Side Cover
Identify the side cover highlighted in blue.
Loosen the thumbscrews that secure the side cover to the system.
Slide and lift the side cover away from the system.
Wireless Module
SMA Module
Identify the SMA module highlighted in blue.
Lift the pull tab to open the PCIe door.
Unroute the SMA module cable from the cable holder on the chassis.
Remove the SMA module from its connector on the system board.
Install
SMA Module
Identify the SMA module location highlighted in blue.
Insert a flat head screwdriver into the bracket hole, push to release it, and lift the bracket out of the system.
Insert the SMA module into its slot on the system board.
Route the SMA module cable through the cable holder on the chassis.
Close the PCIe door.
Wireless Module
Side Cover
Identify the side cover location highlighted in blue.
Align the tabs on the side cover with the slots and place the side cover on the system.
Tighten the thumbscrews that secure the side cover to the system.