Removal
Side Cover
Identify the side cover highlighted in blue.
Slide the release latch to release the side cover from the computer.
Slide the side cover back and lift it off the chassis.
Front bezel
Identify the front bezel highlighted in blue.
Gently pry and release the front bezel tabs sequentially from the top.
Rotate the front bezel outward from the chassis and remove the front bezel.
Graphics card
Identify the expansion card highlighted in blue.
Pull to open the PCIe latch that secures the graphics card.
Hold the securing tab on the graphics card slot and lift the graphics card out of the slot.
Internal Antenna kit
Identify the internal antenna kit highlighted in blue.
Gently pull the internal antenna kit cable out from the hole on the chassis.
Unroute the internal antenna cable from the routing guides on the chassis
Remove the screws that secure the internal antenna to the chassis.
Remove the internal antenna assembly from the chassis.
Install
Internal Antenna kit
Identify the internal antenna kit location highlighted in blue.
Insert the antennas into the slots on the chassis
Install the screws that secures the internal antennas to the chassis.
Route the internal antenna cable through the routing guide and the holes on the chassis.
Route the internal antenna cable through the holes on the chassis.
Graphics card
Identify the expansion card location highlighted in blue
Using the alignment post, connect the graphics card in the connector and press down firmly.
Close the PCIe latch to secure the graphics card in the slot.
Front bezel
Identify the front bezel location highlighted in blue.
Align the front cover tabs with the slots on the chassis.
Rotate the front cover towards the chassis and snap it into place.
Side Cover
Identify the side cover location highlighted in blue.
Align the tabs on the side cover with the slots on the chassis.
Slide the side cover forward until you hear the latch click.