Removal
Side Cover
Identify the side cover highlighted in blue.
Loosen the thumbscrews that secure the side cover to the system.
Slide and lift the side cover away from the system.
Fan Duct
Identify the fan duct highlighted in blue.
Press the retention tabs on both sides of the fan duct to release it.
Remove the fan duct off the chassis.
PS2 and Serial Module
Identify the PS2 and serial module highlighted in blue.
Lift the pull tab to open the PCIe door.
Disconnect the PS2 and serial module cable from the system board.
Remove the PS2 and serial module from the chassis.
Install
PS2 and Serial Module
Identify the PS2 and serial module location highlighted in blue.
Align and place the PS2 and serial module in the PCIe slot on the chassis.
Connect the PS2 and serial module cable on the system board.
Close the PCIe door and press it gently until it clicks in place on the chassis, to secure the PS2 and serial module.
Fan Duct
Identify the fan duct location highlighted in blue.
Place the fan duct into the slots on the chassis.
Push the fan duct towards the back panel of the chassis until it clicks into place.
Side Cover
Identify the side cover location highlighted in blue.
Align the tabs on the side cover with the slots and place the side cover on the system.
Tighten the thumbscrews that secure the side cover to the system.