Removal
System Cover
Identify the system cover highlighted in blue.
Using a flat head or a Phillips screwdriver, rotate the lock counter clockwise.
Lift the latch till the system cover slides back.
Hold the cover on both sides, and lift the cover away from the system.
Low profile right riser
Identify the low profile right riser highlighted in blue
Hold the touch points and lift the expansion card riser from the riser connector on the system board.
Position the riser so that the expansion card will be visible to remove.
Open the expansion card latch
Remove the expansion card from the riser and the remaining part is low profile right riser.
Install
Low profile right riser
Identify the low profile right riser location highlighted in blue
Position the riser to install the expansion card.
Insert the expansion card into the expansion card connector until the card is fully seated.
Close the expansion card latch
Lower the low profile right riser until the riser connector is fully seated in the connector of the system board.
System Cover
Identify the system cover location highlighted in blue.
Align the tabs on the system cover with the guide slots on the system.
Push the system cover latch down.
Using a flat head or Phillips screwdriver, rotate the lock clockwise.