Removal
Side Cover
Identify the side cover highlighted in blue.
Loosen the captive screws that secure the side cover to the chassis.
Slide and lift the side cover off the chassis.
Front Bezel
Identify the front bezel highlighted in blue.
Gently pry and release the front bezel tabs.
Rotate the front bezel outward from the chassis and remove the front bezel.
Hard Drive Assembly
Disk drive Cage
Identify the disk drive cage highlighted in blue.
Remove the screw that secures the disk drive cage to the chassis.
Lift the disk drive cage and detach it from the mounting points on the chassis.
Flip the disk drive cage and place it on the chassis.
Lift the disk drive cage away from the system.
Wireless Module (WLAN)
WLAN Antenna - External
Identify the WLAN antenna highlighted in blue.
Remove the nut and washer from the two antenna heads.
Gently pry and slide the antenna heads inward of the chassis.
Unroute the antenna cables from the routing guides on the system board.
Lift the WLAN antenna off the chassis.
Install
WLAN Antenna - External
Identify the WLAN antenna location highlighted in blue.
Push the antenna heads into the slots outward of the chassis.
Install the nut and washer to secure the antennas to the chassis.
Route the antenna cables through the routing guides on the system board.
Press the antenna cable into the clip on the system board.
Wireless Module (WLAN)
Disk drive Cage
Identify the disk drive cage location highlighted in blue.
Place the disk drive cage upside down on the chassis.
Flip the disk drive cage and match its mounting points with the slots on the chassis.
Place the disk drive cage and align with the screw hole on the chassis.
Install the screw that secures the disk drive cage to the chassis.
Hard Drive Assembly
Front Bezel
Identify the front bezel location highlighted in blue.
Align the front bezel tabs with the slots on the chassis.
Slide and install the front bezel with its tabs into the slots on the chassis.
Rotate the front bezel towards the chassis and snap it into place.
Side Cover
Identify the side cover location highlighted in blue.
Place and slide the side cover towards the front of the chassis.
Tighten the captive screws that secure the side cover to the chassis.