Removal
Side Cover
Identify the side cover highlighted in blue.
Loosen the captive screw that secures the side cover to the chassis.
Pull the release latch to release the cover from the chassis.
Lift the side cover from the chassis.
Air shroud
Identify the air shroud highlighted in blue.
Hold the air shroud at the gripping points and Pull the air shroud upwards and out of the computer.
Solid State Drive (SSD) 2280
Identify the solid state drive (SSD) highlighted in blue.
Remove the screw that secures the SSD to the system board.
Slide and lift the SSD off the slot on the system board.
Install
Solid State Drive (SSD) 2280
Identify the solid state drive (SSD) location highlighted in blue.
Align and slide the SSD at an angle and install into the system board.
Install the screw that secures the SSD to the system board.
Air shroud
Identify the air shroud location highlighted in blue.
Align the air shroud over the heat sink and system board holding and place it in the slot.
Press the air shroud down until the tabs secure into place.
Side Cover
Identify the side cover location highlighted in blue.
Align with the tabs and install the side cover on to the chassis.
Tighten the captive screw to secure the side cover to the chassis.