Removal
Side Cover
Identify the side cover highlighted in blue.
Loosen the captive screw that secures the side cover to the chassis.
Pull the release latch to release the cover from the chassis.
Lift the side cover from the chassis.
Air shroud
Identify the air shroud highlighted in blue.
Hold the air shroud at the gripping points and Pull the air shroud upwards and out of the computer.
Front Chassis Fan - Upper
Identify the front chassis fan highlighted in blue.
Remove the screw that secures the fan to the chassis.
Disconnect the fan cable from the connector on the system board.
Press the tab to release the chassis fan from the slot.
At an angle, lift the chassis fan and remove it from the chassis.
Install
Front Chassis Fan - Upper
Identify the front chassis fan location highlighted in blue.
Align the tabs on the fan with the slots on the chassis.
Insert the chassis fan at an angle into the slot in the chassis.
Connect the fan cable to the connector on the system board.
Install the screw to secure the fan to the chassis.
Air shroud
Identify the air shroud location highlighted in blue.
Align the air shroud over the heat sink and system board holding and place it in the slot.
Press the air shroud down until the tabs secure into place.
Side Cover
Identify the side cover location highlighted in blue.
Align with the tabs and install the side cover on to the chassis.
Tighten the captive screw to secure the side cover to the chassis.