Removal
Side Cover
Identify the side cover highlighted in blue.
Loosen the thumb screw that secures the side cover to the system.
Slide and lift the side cover off the system.
Hard Drive Assembly
Identify the hard drive assembly highlighted in blue.
Press the release tabs on the hard drive assembly and slide it towards the front of the system.
Lift the hard drive assembly from the system.
Wireless Module (WLAN)
SMA Antenna - Location 3
Identify the SMA antenna highlighted in blue.
Unroute the white antenna cable from the routing guides on the system.
Remove the screw that secures the SMA antenna assembly to the system.
Push at an angle of the SMA antenna assembly to the inside and lift it away from the system.
Install
SMA Antenna - Location 3
Identify the SMA antenna location highlighted in blue.
Align and place the antenna bracket on the system board.
Insert and align the screw hole on the SMA antenna assembly with the screw hole on the back view.
Install the screw that secures the SMA antenna assembly to the system.
Route the antenna cable through the routing guides on the system.
Wireless Module (WLAN)
Hard Drive Assembly
Identify the hard drive assembly location highlighted in blue.
Place the hard drive assembly into the slot on the system.
Slide the hard drive assembly toward the connector on the system board until the release tabs click into place.
Side Cover
Identify the side cover location highlighted in blue.
Place and slide the side cover towards the back of the system.
Tighten the thumb screw that secures the side cover to the system.