Removal
Base Cover
Align the system with the outline to enable the AR lock.
Identify the base cover highlighted in blue.
Loosen the captive screws that secure the cover to the system.
Slide the cover toward the back of the system and lift to remove.
Front Bezel
Identify the front bezel highlighted in blue.
Lift the tabs to release the front bezel from the system.
Slightly lift system to remove the front bezel from the system.
Hard drive assembly
Identify the hard drive assembly highlighted in blue.
Slide the release tab to unlock the hard drive and optical assembly.
Disconnect the data and power cables from the connectors.
Holding the release tab, disconnect the optical drive data and power cables.
Slide and lift the hard drive and optical drive assembly from the system.
Memory Modules
Identify the memory module highlighted in blue.
Separate the securing clips from the memory module until the memory module pops up.
Remove the memory module from the socket on the system board.
Install
Memory Modules
Identify the memory module location highlighted in blue.
Install the memory module into the memory module socket.
Press the memory module until the retention tabs click into place.
Hard drive assembly
Identify the hard drive assembly location highlighted in blue.
Install the hard drive and optical drive assembly into the slot on the system.
Connect the data and power cables onto the optical drive.
Connect the data and power cable on the hard drive and optical assembly.
Slide the tab to lock the hard drive assembly.
Front Bezel
Identify the front bezel location highlighted in blue.
Slightly lift system to insert the tabs on the bezel into the slots on the system.
Base Cover
Identify the base cover location highlighted in blue.
Install the cover on the system. Slide forward until it clicks into place.
Tighten the captive screws to secure the cover.