Removal
Base Cover
Identify the base cover highlighted in blue.
Loosen the captive screws that secure the cover to the system.
Slide the cover toward the back and lift to remove from the system
Front Bezel
Identify the front bezel highlighted in blue.
Lift the tabs to release the bezel from the system.
Slightly lift the front of the system to release the bezel from system.
Front Panel
Identify the front panel highlighted in blue.
Lift the front panel up to open.
Optical Drive
Identify the optical drive drive (ODD) highlighted in blue
Disconnect the data and power cables from the optical disk drive.
Close the front panel before releasing the ODD from the system.
Press the release latch.
Slide the optical disk drive (ODD) assembly out of the system.
Install
Optical Drive
Identify the optical disk drive (ODD) location highlighted in blue
Slide the optical disk drive assembly into the system until it clicks.
Open the front panel before connecting the cables.
Connect the data and power cables from the optical disk drive.
Front Panel
Identify the front panel highlighted in blue.
Close the front panel door. Push down until it clicks into place.
Front Bezel
Identify the front bezel location highlighted in blue
Align the tab holders on the system and push the bezel until the tabs click into place.
Base Cover
Identify the base cover location highlighted in blue.
Place the cover on the system and slide the cover until it clicks into place.
Tighten the captive screws to secure the cover to the system.