How to replace the Solid State Drive (SSD) on a Latitude 5430

This 3D experience gives you the step by step process of replacing the Solid State Drive (SSD) and a Latitude 5430.

Removal

Base Cover

Identify the base cover highlighted in blue.

Loosen the captive screws that secure the base cover.

Pry the base cover near the hinges to release it from the system.

Remove the base cover by loosening the sides and front.

Solid State Drive (SSD)

Install

Solid State Drive (SSD)

Base Cover

Identify the base cover location highlighted in blue.

Align the base cover tabs to the slots, press the cover until it clicks into place.

Tighten the captive screws that secure the base cover to the system.