Removal
Side Cover
Identify the side cover highlighted in blue.
Slide the release latch until you hear a click.
Slide the side cover towards the back and lift it from the system.
Hard Drive Assembly (3.5)
Identify the hard drive assembly highlighted in blue.
Disconnect the data and power cables from the hard drive.
Push the left tab towards the hard drive to free the assembly from the chassis.
Release the hard drive assembly from the tabs on the right side and slide the assembly out.
3.5 Hard Drive
Position the hard drive assembly on the flat surface as shown.
Identify the hard drive highlighted in blue.
Pull the two tabs from the bracket to release the hard drive.
Lift at an angle and slide the hard drive out off the bracket.
Install
3.5 Hard Drive
Position the hard drive assembly on the flat surface as shown.
Identify the hard drive location highlighted in blue.
Align the hard drive with the mounting points on the caddy and place the hard drive onto it.
Pull the tabs on the right side of the bracket and snap the hard drive onto the hard drive carrier.
Hard Drive Assembly (3.5)
Identify the hard drive assembly location highlighted in blue.
Place the tabs on the right side of the hard drive caddy onto the holders on the chassis and push the left side of the caddy down until it clicks into place.
Connect the data and power cables to the connectors on the hard drive.
Side Cover
Identify the side cover location highlighted in blue.
Slide the side cover towards the front of the system until you hear the release latch click.