Removal
Base Cover
Identify the base cover highlighted in blue.
Loosen the captive screws that secure the base cover to the palm rest assembly.
Pry open the top side of the base cover, then continue along the sides to fully detach the base cover.
Lift the base cover off the palm rest assembly.
Identify the base cover location highlighted in blue.
Align and place the base cover on the palm rest assembly and snap it into place.
Tighten the captive screws that secure the base cover to the palm rest assembly.
Memory Module
Identify the memory module highlighted in blue.
Pry the clips that secure the memory module until it pops up.
Slide and remove the memory module from the system board.
Identify the memory module location highlighted in blue.
Slide and install the memory module on the system board.
Press the memory module down until it clicks into place.
Install
Memory Module
Identify the solid state drive (SSD) location highlighted in blue.
Align and slide the SSD into the slot on the system board.
Install the screw that secures the SSD to the system board.
Base Cover
Identify the battery cable location highlighted in blue.
Connect the battery cable to the system board.