Removal
Side Cover
Identify the side cover highlighted in blue.
Loosen the thumb screw that secures the side cover to the chassis.
Slide and lift the side cover off the chassis.
Optional Type-C module
Identify the optional Type-C module highlighted in blue.
Remove the screws that secure the optional Type-C module.
Remove the optional Type-C module from its slot on the chassis.
Lift and hold the optional Type-C module in place above the system board.
Disconnect the Type-C display port and USB cables from the system board.
Remove the optional Type-C module from the computer.
Install
Optional Type-C module
Identify the optional Type-C module position highlighted in blue.
Place the Type-C module at an angle and hold in position.
Connect the Type-C display port and USB cables to the system board and align the optional Type-C module on the system.
Insert the optional Type-C module into its slot from the inside of your computer.
Install the screws that secure the optional Type-C module.
Side Cover
Identify the side cover location highlighted in blue.
Slide the side cover into place towards the front of the computer
Tighten the thumb screw that secure the side cover to the chassis.