How to replace the Memory module on a PowerEdge C6620

This 3D experience gives you the step by step process of replacing the Memory module and a PowerEdge C6620. The procedure will also include removing the Air Shroud and reinstalling them.

Removal

Air Shroud

Identify the air shroud highlighted in blue.

Press the blue clip and lift the air shroud.

Disengage the air shroud hook from the slot on the chassis and remove the air shroud.

Memory module

Locate the appropriate memory module socket.

To release the memory module from the socket, simultaneously press the ejectors on both ends of the memory module socket to fully open.

Lift the memory module away from the system.

Install

Memory module

Locate the appropriate memory module socket.

Align the edge connector of the memory module with the alignment key of the memory module socket, and insert the memory module in the socket.

Press the memory module with your thumbs until the ejectors firmly click into place.

Air Shroud

Identify the air shroud location highlighted in blue.

Align the slot on the air shroud with the standoff on the system.

Lower the air shroud until the blue clip locks in place.