How to replace the Front bezel on a Optiplex Micro Plus 7010

This 3D experience gives you the step by step process of replacing the Front bezel on a Optiplex Micro Plus 7010.

Removal

Side Cover

1. Identify the side cover highlighted in blue.
2. Loosen the thumb screw that secures the side cover to the chassis.
3. Slide and lift the side cover off the chassis.

Front bezel

1. Place your side cover assembly computer as shown.
2. Identify the front bezel highlighted in blue.
3. Gently pry and release the front bezel tabs sequentially from the top.
4. Rotate the front bezel outward from the chassis and remove the front bezel.

Install

Front bezel

1. Identify the front bezel location highlighted in blue.
2. Align the front cover tabs with the slots on the chassis.
3. Rotate the front cover towards the chassis and snap it into place.

Side Cover

1. Identify the side cover location highlighted in blue.
2. Slide the side cover into place towards the front of the computer