Removal
Side Cover
Identify the side cover highlighted in blue.
Slide the release latch to release the side cover from the computer.
Slide the side cover back and lift it off the chassis.
Wireless Module
External SMA antenna kit
Identify the external SMA antenna kit highlighted in blue.
Open the cable holder that secure the SMA module cable in place.
Unroute the SMA module cable from the cable holder on the chassis.
Lift the pull tab to open the PCIe door.
Hold and remove the SMA module from its connector on the system board.
Install
External SMA antenna kit
Identify the external SMA antenna kit location highlighted in blue.
Use a flat head screwdriver in the bracket hole, push to release it, and lift the bracket out of the system to remove the PCIe dummy bracket.
Lift the pull tab to open the PCIe door.
Insert the optional SMA module into its slot on the system board.
Route the SMA module cable through the cable holder on the chassis.
Close the cable holder to secure the SMA module cable in place.
Lift the pull tab to close the PCIe door.
Wireless Module
Side Cover
Identify the side cover location highlighted in blue.
Align the tabs on the side cover with the slots on the chassis.
Slide the side cover forward until you hear the latch click.