Removal
System Cover
Identify the system cover highlighted in blue.
Using a flat head or a Phillips screwdriver, rotate the lock counter clockwise.
Lift the latch till the system cover slides back.
Hold the cover on both sides, and lift the cover away from the system.
Cooling Shroud
Identify the air shroud highlighted in blue
Holding the touch points, lift the cooling shroud away from the system.
Expansion Card Riser 2 & 3 Blank
Riser 2c
Identify the Riser 2c highlighted in blue.
Pull the expansion card latch out of the slot and pull the expansion card from the system
Lift the riser to disengage from the system board and remove.
Install
Riser 2c
Identify the Riser 2c location highlighted in blue.
Align the riser to the slot and press down to connect to the system board.
Insert the card edge connector firmly into the expansion card connector and close the latch.
Expansion Card Riser 2 & 3 Blank
Cooling Shroud
Identify the cooling shroud location highlighted in blue
Align the tabs on the air shroud with the slots on the system.
Lower the air shroud into the system until it is firmly seated.
System Cover
Identify the system cover location highlighted in blue.
Align the tabs on the system cover with the guide slots on the system.
Push the system cover latch down.
Using a flat head or Phillips screwdriver, rotate the lock clockwise.