How to replace the System Memory on a PowerEdge R6715

This 3D experience gives you the step by step process of replacing the System Memory and a PE R6715. The procedure will also include removing the System Cover and reinstalling them.

Removal

System Cover

1. Identify the system cover highlighted in blue.
2. Using a Philips #2 screwdriver, rotate the lock counterclockwise to the unlock position.
3. Lift the release latch until the system cover slides back.
4. Lift the cover from the system.

System Memory

1. Identify the system memory highlighted in blue.
2. To release system memory from the socket, simultaneously press the ejectors on both ends.
3. Lift and remove the system memory from the system.

Install

System Memory

1. Identify the system memory location highlighted in blue.
2. Press the system memory until the socket levers click firmly into place.

System Cover

1. Identify the system cover location highlighted in blue.
2. Align the tabs on the system cover with the guide slots on the system, and slide the system cover.
3. Close the system cover release latch.
4. Using a Philips #2 screwdriver, rotate the lock clockwise to the locked position.