Removal
Base Cover
Identify the base cover highlighted in blue.
Remove the screws that secure the base cover to the system.
Loosen the captive screws on the base cover.
Using a plastic scribe, pry the base cover near the hinges to release it from the system.
Lift the base cover off the system.
Battery Cable
Identify the battery cable highlighted in blue.
Disconnect the battery cable from the system board.
Press and hold the power button for 10 seconds to ground the system and remove residual static electricity.
Battery
Touchpad
Identify the touchpad highlighted in blue.
Remove the screws that secure the touchpad bracket to the system.
Lift the metal bracket from the system.
Open the latch and disconnect the touchpad cable from the touchpad.
Remove the screws that secure the touchpad to the system.
Lift the touchpad, along with the cable, from the system.
Install
Touchpad
Identify the touchpad location highlighted in blue.
Install the touchpad into the slot on the system.
Install the screws to secure the touchpad.
Connect the touchpad cable and close the latch to secure.
Install the touchpad bracket into the slot on the system.
Install the screws to secure the touchpad bracket.
Battery
Battery Cable
Identify the battery cable location highlighted in blue.
Connect the battery cable to the connector on the system board.
Base Cover
Identify the base cover location highlighted in blue.
Align the base cover and press the edges of the cover until it clicks into place.
Tighten the screws captive that secure the base cover.
Install the screws that secure the base cover.