Removal
System Cover
Identify the system cover highlighted in blue.
Turn the latch release lock to the unlocked position.
Press the cover release latch and remove the system cover.
Front Bezel
Identify the front bezel highlighted in blue
Unlock the front bezel by using the key.
Press the release latch at the top of the bezel.
Pull the top end of the bezel away from the system.
Unhook the bezel tabs from the slots at the bottom of the system, and pull the bezel away from the system.
Air shroud
Position the System as shown in video.
Identify the air shroud highlighted in blue
Holding the touch points at the center of the air shroud, lift the shroud from the system.
Control panel
Identify the control panel highlighted in blue
Remove the screw that secures control panel to the chassis.
Disconnect the control panel cable and the control panel USB cable from the system board.
Open the cable retention latch to create a slack in the cable to pull the control panel out to disconnect the cables.
Slide the control panel out of the chassis.
Disconnect the control panel cable and the control panel USB cable from the Control panel
Install
Control panel
Identify the control panel location highlighted in blue
Connect the control panel cable and the control panel USB cable to the control panel assembly.
Align and insert the control panel into the control panel slot in the chassis.
Secure the control panel to the chassis by using the screw.
Connect the control panel cable and the control panel USB cable to the system board.
Close the cable retention latch.
Air shroud
Identify the cooling shroud location highlighted in blue
Align the tabs on the air shroud with the securing slots on the chassis.
Lower the air shroud into the chassis until it is firmly seated.
Position the System as shown in video.
Front Bezel
Identify the front bezel location highlighted in blue
Insert the bezel tabs into the slots in the chassis.
Press the release latch, and push the bezel toward the system until the bezel locks into place.
Using the key lock the bezel.
System Cover
Identify the system cover location highlighted in blue.
Align the tabs on the system cover with the slots on the chassis.
Rotate the latch release lock clockwise to the locked position.