Removal
Base Cover
Identify the base cover highlighted in blue.
Loosen the thumbscrew that secures the cover to the system.
Slide and lift the cover to remove from the system.
VGA port
Identify the VGA port highlighted in blue.
Disconnect the cable from the connector on the system board.
Remove the screw that secure the VGA port to the system.
Remove the screws that secure the VGA port to the system.
Pull and lift the VGA port away from the system.
Coin Cell Battery
Identify the coin cell battery highlighted in blue.
Press the release latch until the coin cell battery pops out.
Remove the coin cell battery from the system board.
Install
Coin Cell Battery
Identify the coin cell battery location highlighted in blue
With the "+" sign facing up, slide the coin cell under the securing tabs.
Press the battery into the connector until it locks into place.
VGA port
Identify the VGA port position highlighted in blue.
Insert and align the VGA port into the system.
Install the screw that seure the VGA port to the system.
Install the screws that seure the VGA port to the system.
Connect the cable to the connector on the system board.
Base Cover
Identify the base cover location highlighted in blue.
Place the cover on the system and slide the cover until it clicks into place.
Tighten the thumb screw to secure the cover to the system.