Removal
Base Cover
Align the system with the outline to enable the AR lock.
Identify the base cover highlighted in blue.
Slide the blue tab to release the base cover from the system.
Slide the cover toward the back and lift to remove from the system.
Front Bezel
Identify the front bezel highlighted in blue.
Lift the tabs to release the bezel from the system.
Slightly lift the front of the system to release the bezel from system.
Front Panel
Identify the front panel highlighted in blue.
Lift the front panel up to open.
Power Switch
Identify the power button highlighted in blue.
Disconnect the power button cable and unroute from the retention clip.
Press the release tabs and push power button outwards.
Close the front panel door.
Remove the power button from the system.
Install
Power Switch
Identify the power button location highlighted in blue.
Install the power button into the slot from the front of the system and press it until it clicks into place.
Open the front panel door.
Connect the cable and route through the retention clip.
Front Panel
Identify the front panel highlighted in blue.
Close the front panel door. Push down until it clicks into place.
Front Bezel
Identify the front bezel location highlighted in blue
Align the tab holders on the system and push the bezel until the tabs click into place.
Base Cover
Identify the base cover location highlighted in blue.
Install the cover on the system and slide it until it clicks into place.
Slide the blue tab to lock the cover to the system.