Removal
Left Side Cover
Identify the side cover highlighted in blue.
Loosen the screws that secure the side cover to the chassis.
Slide and lift the side cover from the chassis.
Front Cover
Identify the front cover highlighted in blue.
Pry and release the tabs that secure the front cover to the chassis.
Rotate the front cover outward and lift it from the chassis.
Drive Bay Assembly
Identify the drive bay assembly highlighted in blue.
Disconnect the data and power cables from the hard drive.
Lift the drive bay assembly at an angle to release the tabs from the chassis.
Slide and remove the drive bay assembly from the chassis.
Media Card Reader
Identify the media card reader highlighted in blue.
Remove the screw that secures the media card reader bracket to the chassis.
Lift the media card reader to disconnect it from its connector on the system board.
Unhook the tabs and remove the media card reader from the chassis.
Install
Media Card Reader
Identify the media card reader location highlighted in blue.
Place the media card reader tabs through the slots on the chassis and slide them towards the opening.
Push down the media card reader to connect it to the connector on the system board.
Install the screw that secures the media card reader bracket to the chassis.
Drive Bay Assembly
Identify the drive bay assembly location highlighted in blue.
Slide and secure one side of the drive bay assembly to the chassis.
Press down the other end of the drive bay assembly, securing the tabs into the slots on the chassis.
Connect the data and power cables to the hard drive.
Front Cover
Identify the front cover location highlighted in blue.
Align and insert the front cover tabs into the slots on the right side of the chassis.
Rotate the front cover toward the chassis and press it into place.
Left Side Cover
Identify the side cover location highlighted in blue.
Align and slide the left side cover onto the chassis.
Tighten the screws that secure the side cover to the chassis.