Removal
System Cover
Identify the system cover highlighted in blue.
Turn the latch release lock to the unlocked position.
Press the cover release latch and remove the system cover.
Air shroud
Position the System as shown in video.
Identify the air shroud highlighted in blue
Holding the touch points at the center of the air shroud, lift the shroud from the system.
Expansion card holder
Identify the Expansion Card Holder highlighted in blue.
Press the tab and remove the expansion-card holder from the chassis.
BOSS Module
Identify the BOSS module.
Press the expansion card latch and push down the latch to open it.
Hold the BOSS module by its edges, pull the card until it disengages from the riser.
M.2 SSD card (Solid State Drive)
Position the boss module over as shown in video.
Identify the M.2 SSD card highlighted in blue.
Loosen the screw that secures the M.2 SSD module.
lift the retention strap that secures the M.2 SSD module
Pull the M.2 SSD module away from the BOSS card.
Install
M.2 SSD card (Solid State Drive)
Position the boss module over as shown in video
Identify the M.2 SSD card location highlighted in blue.
Align the notch with the tab and insert the SSD into the connector on the BOSS card.
Secure the M.2 SSD module on the BOSS card with the retention strap.
Tighten the screw that secures the M.2 SSD module.
BOSS Module
Identify the BOSS module location.
Open the expansion card latch adjacent to the slot you want to install the expansion card.
Holding the card by its edges, position the card so that the card aligns with the expansion card connector.
Insert the BOSS module into the slot until its fully seated.
Close the expansion card latch by pushing the latch up until the latch snaps into place.
Expansion card holder
Identify the Expansion Card Holder location highlighted in blue.
Align the expansion card holder with the projections on the chassis and push it down until firmly seated.
Air shroud
Identify the cooling shroud location highlighted in blue
Align the tabs on the air shroud with the securing slots on the chassis.
Lower the air shroud into the chassis until it is firmly seated.
Position the System as shown in video.
System Cover
Identify the system cover location highlighted in blue.
Align the tabs on the system cover with the slots on the chassis.
Rotate the latch release lock clockwise to the locked position.