Dell OpenManage Array Manager, v.3.5.0.555.4, A02
AUTOMATISKT INSTALLERAD Den här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.Innehållet på den här sidan kan ha översatts automatiskt. Fyll i formuläret längst ned på sidan för att ge feedback.
Array Manager software provides a comprehensive storage management solution in an integrated, graphical view. From a single location, Array Manager enables you to configure and manage local and remote storage attached to a server, while the server is online and continuing to process requests.
Rekommenderat
Hitta den bästa nerladdningen för ditt system
Ange din produktinformation för att se den senaste informationen om drivrutiner för ditt systemSök efter support
Ange din Dell service tag eller modell
Vill du söka efter din produkt? Ange en produktidentifierare. Visa mig hur
Den här drivrutinen är inte kompatibel
Den här drivrutinen gäller inte för den valda produkten. Välj en annan produkt för att ange din produktinformation för den här drivrutinen igen eller gå till produktsupportsidan för att visa alla drivrutiner för en annan produkt.
Logga in på Windows som administratör för att använda automatisk skanning. Om du redan är inloggad som administratör och ser det här meddelandet ska du starta om.
Ditt system hanteras av IT-administratören och funktionerna kan vara begränsade.
Hitta fler uppdateringar. Använd SupportAssist för att hitta alla de senaste drivrutinsuppdateringarna för din enhet.
Korrigeringar och förbättringar
The following issues are corrected in Array Manager Version 3.5:
* Firmware download may not work on the PERC 2, 2/Si, 3/Si, and 3/Di controllers on Windows and NetWare. Firmware download may not work on the Ultra SCSI, Ultra2 SCSI, Ultra160 SCSI, LSI 1020, and LSI 1030 controllers on NetWare.
* Create Volume and Upgrade Disk buttons are enabled on Windows Server 2003.
* Basic disks may disappear under the Disks object in the tree view when initializing a virtual disk.
* DCOM (Distributed Component Object Model)
* Battery fields display "Unknown" in log file.
* Array Manager does not update the Disk View tab at startup on a PERC 3/DC controller.
* Attempts to split a mirror or unmirror a virtual disk may fail.
* Formatting a virtual disk may destroy drive mapping.
* Create virtual disk may fail on PERC 3/Di controllers.
* Attempts to delete a dynamic virtual disk may fail.
* Cannot expand a concatenated virtual disk that fully utilizes an array disk.
Läs mer
* Firmware download may not work on the PERC 2, 2/Si, 3/Si, and 3/Di controllers on Windows and NetWare. Firmware download may not work on the Ultra SCSI, Ultra2 SCSI, Ultra160 SCSI, LSI 1020, and LSI 1030 controllers on NetWare.
* Create Volume and Upgrade Disk buttons are enabled on Windows Server 2003.
* Basic disks may disappear under the Disks object in the tree view when initializing a virtual disk.
* DCOM (Distributed Component Object Model)
* Battery fields display "Unknown" in log file.
* Array Manager does not update the Disk View tab at startup on a PERC 3/DC controller.
* Attempts to split a mirror or unmirror a virtual disk may fail.
* Formatting a virtual disk may destroy drive mapping.
* Create virtual disk may fail on PERC 3/Di controllers.
* Attempts to delete a dynamic virtual disk may fail.
* Cannot expand a concatenated virtual disk that fully utilizes an array disk.
Version
3.5.0.555.4, A02
Utgivningsdatum
09 aug. 2004
Hämtningstyp
Program
Kategori
Systemhantering
Prioritet
RekommenderasDell Technologies rekommenderar att du installerar den här uppdateringen under nästa schemalagda uppdateringscykel. Uppdateringen innehåller ändringar för att bibehålla det allmänna systemtillståndet. Den säkerställer att systemets programvara förblir aktuell och kompatibel med andra systemmoduler (fast programvara, BIOS, drivrutiner och programvara) och kan inkludera andra nya funktioner.
Tillgängliga format
Visa viktig information
Filformat:
Extraherar filer direkt till en lokal disk
Filnamn:
a350a02.exe
Filstorlek:
78 MB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Det här filformatet består av ett arkiv av filer som kan packas upp i en katalog på hårddisken. Installationen kan sedan göras från den katalogen.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
Inte tillgänglig
SHA1:
Inte tillgänglig
SHA-256:
Inte tillgänglig
Filformat:
Extern versionsinformation
Filnamn:
rdm350.txt
Filstorlek:
48.97 KB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Det här filformatet innehåller oformaterad text som kan visas med en vanlig textredigerare.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
Inte tillgänglig
SHA1:
Inte tillgänglig
SHA-256:
Inte tillgänglig
I och med att du hämtar accepterar du villkoren i Dells licensavtal för programvara. (på Engelska)
Viktig information
Array Manager cannot be installed on a system that has the ASPI 4.7.x driver installed. If you have the ASPI 4.7.x driver installed on your system, you need to remove this driver and install the ASPI 4.6 driver.You can do this by downloading the ASPI 4.6 package from http://support.dell.com. The ASPI 4.6 package uninstalls the ASPI 4.7.x driver and installs the ASPI 4.6 driver. Refer to the documentation of any other applications installed on the system to see if those applications have known problems with the ASPI 4.6 driver.
****************************************************************************
Applications that query the Array Manager Management Information Base (MIB) may experience unpredictable behavior when Array Manager is installed on a system that also has HP OpenView installed.
****************************************************************************
When upgrading your ROMB Controller from version 2.7.1 to version 2.8.0, your 30 Second Timeout setting will change from Enabled to Disabled. When your 30 Second Timeout setting is Disabled, the system will wait indefinitely during boot up for user response in the event the controller array configuration has changed. To change your 30 Second Timeout back to Enable, please follow these steps: 1.) During boot up process, press when the following option appears on screen: <<< Press for Adaptec RAID Configuration Utility! >>> 2.) Using the arrow keys, select SCSISelect Utility and press ENTER. 3.) Using the arrow keys, select Controller Configuration and press ENTER. 4.) Using the arrow keys, select 30 Second Config Change Timeout and press ENTER. 5.) Using the arrow keys, select ENABLED 6.) Press ESC to exit menu and select YES when prompted to save the changes made. 7.) Press ESC twice and select YES when prompted to save the changes made, the system will reboot with new settings.
****************************************************************************
Please see the readme for more important info.
****************************************************************************
Applications that query the Array Manager Management Information Base (MIB) may experience unpredictable behavior when Array Manager is installed on a system that also has HP OpenView installed.
****************************************************************************
When upgrading your ROMB Controller from version 2.7.1 to version 2.8.0, your 30 Second Timeout setting will change from Enabled to Disabled. When your 30 Second Timeout setting is Disabled, the system will wait indefinitely during boot up for user response in the event the controller array configuration has changed. To change your 30 Second Timeout back to Enable, please follow these steps: 1.) During boot up process, press
****************************************************************************
Please see the readme for more important info.
Operativsystem som stöds
Novell Netware
Windows Server 2003
Windows NT 4.0
Windows 2000
Windows Powered
Installationsanvisningar
Custom Instructions for a350a02.exe:
Custom Instructions for a350a02.exe:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I
agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file
to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-
click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.
Installation
1. Browse to the folder where extracted the download package.
2. Double click on setup.exe win the “Setup” folder. Setup should start
automatically
3. Follow the instructions shown in the Setup wizard.
Note: If you get an error message saying "An unsupported version of
ASPI has been detected on your system..." you must download the
ASPI 4.6 package from the support.dell.com website. Following the
ASPI 4.6 package instructions will uninstall the ASPI 4.7.x driver and
install the ASPI 4.6 driver, thus enabling installation of Array Manager
3.5.0. Refer to the documentation of any other applications installed on
the system to see if those applications have known problems with the
ASPI 4.6 driver.
4. Reboot the system when finished.
NOTE: When installing the managed system component on a Windows
2000 system, the Windows 2000 Plug and Play Manager will activate
after the reboot, indicating it discovered new hardware. You may be
required to perform a second reboot if volumes are present on your
system. Otherwise, allow Plug and Play to register the new driver. (This
occurs automatically.)
Custom Instructions for rdm350.txt:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I
agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file
to your hard drive.
Custom Instructions for a350a02.exe:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I
agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file
to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-
click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.
Installation
1. Browse to the folder where extracted the download package.
2. Double click on setup.exe win the “Setup” folder. Setup should start
automatically
3. Follow the instructions shown in the Setup wizard.
Note: If you get an error message saying "An unsupported version of
ASPI has been detected on your system..." you must download the
ASPI 4.6 package from the support.dell.com website. Following the
ASPI 4.6 package instructions will uninstall the ASPI 4.7.x driver and
install the ASPI 4.6 driver, thus enabling installation of Array Manager
3.5.0. Refer to the documentation of any other applications installed on
the system to see if those applications have known problems with the
ASPI 4.6 driver.
4. Reboot the system when finished.
NOTE: When installing the managed system component on a Windows
2000 system, the Windows 2000 Plug and Play Manager will activate
after the reboot, indicating it discovered new hardware. You may be
required to perform a second reboot if volumes are present on your
system. Otherwise, allow Plug and Play to register the new driver. (This
occurs automatically.)
Custom Instructions for a350a02.exe:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I
agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file
to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-
click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.
Installation
1. Browse to the folder where extracted the download package.
2. Double click on setup.exe win the “Setup” folder. Setup should start
automatically
3. Follow the instructions shown in the Setup wizard.
Note: If you get an error message saying "An unsupported version of
ASPI has been detected on your system..." you must download the
ASPI 4.6 package from the support.dell.com website. Following the
ASPI 4.6 package instructions will uninstall the ASPI 4.7.x driver and
install the ASPI 4.6 driver, thus enabling installation of Array Manager
3.5.0. Refer to the documentation of any other applications installed on
the system to see if those applications have known problems with the
ASPI 4.6 driver.
4. Reboot the system when finished.
NOTE: When installing the managed system component on a Windows
2000 system, the Windows 2000 Plug and Play Manager will activate
after the reboot, indicating it discovered new hardware. You may be
required to perform a second reboot if volumes are present on your
system. Otherwise, allow Plug and Play to register the new driver. (This
occurs automatically.)
Custom Instructions for rdm350.txt:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I
agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file
to your hard drive.
Custom Instructions for a350a02.exe:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I
agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file
to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-
click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.
Installation
1. Browse to the folder where extracted the download package.
2. Double click on setup.exe win the “Setup” folder. Setup should start
automatically
3. Follow the instructions shown in the Setup wizard.
Note: If you get an error message saying "An unsupported version of
ASPI has been detected on your system..." you must download the
ASPI 4.6 package from the support.dell.com website. Following the
ASPI 4.6 package instructions will uninstall the ASPI 4.7.x driver and
install the ASPI 4.6 driver, thus enabling installation of Array Manager
3.5.0. Refer to the documentation of any other applications installed on
the system to see if those applications have known problems with the
ASPI 4.6 driver.
4. Reboot the system when finished.
NOTE: When installing the managed system component on a Windows
2000 system, the Windows 2000 Plug and Play Manager will activate
after the reboot, indicating it discovered new hardware. You may be
required to perform a second reboot if volumes are present on your
system. Otherwise, allow Plug and Play to register the new driver. (This
occurs automatically.)
Hjälp och självstudiekurser för drivrutiner
Fler hämtningar finns på Drivrutiner och hämtningsbara filer.
Mer information om hur du använder sidan finns i Hjälp och anvisningar för drivrutiner