Zu den Hauptinhalten

Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

PDF

SYSCFG For IPv6 Configuration

The following table lists all valid options and arguments for IPv6 configuration along with a description of each option. These options are applicable only if the DRAC on your system supports IPv6.

NOTE: On PowerEdge 12G and later systems, this option is available only with the appropriate installed license.

Table 1. SYSCFG Options and Arguments for IPv6 Configuration
Option	Sub-option	Valid Arguments	Description
`lancfgparamsv6 or lcpv6`	`--ipv6`	`enable, disable`	Enables or disables the IPv6 stack. A:> syscfg lcpv6 --ipv6=enable
	`--ipsrcv6=static` `--ipaddrv6= < ipv6address>` `--prefixlengthv6=< prefix lengthv6>` `--gatewayv6=< ipv6gateway address >`	NA	Allows you to manually configure IPv6 addresses. A:>syscfg lcpv6 --ipsrcv6=static --ipaddrv6=1234:1234:1234::1234 --prefixlengthv6=32 --gatewayv6=1234:1234:1234::1
	`--ipsrcv6=auto`	NA	Automatically configures the IPv6 addresses. A:>syscfg lcpv6 --ipsrcv6=auto
	`--dnssrcv6=auto`	NA	Automatically configures the DNS address. A:>syscfg lcpv6 --dnssrcv6=auto
	`--dnssrcv6=static` `--dnsserver1v6=< ipv6dnsserver1address>`	NA	Allows you to manually set the DNS address.
	`--linklocaladdripv6=< linklocaladdripv6>`		Allows you to view IPv6 addresses. A:>syscfg lcpv6 --linklocaladdripv6=134.56.45.233
	`--gatewayv6=< gatewayv6>`		Allows you to view IP gatewayv6 address.