Μετάβαση στο κύριο περιεχόμενο
Έξοδος

Καλώς ορίσατε στην Dell

Ο λογαριασμός μου
  • Υποβάλετε παραγγελίες γρήγορα και εύκολα
  • Δείτε τις παραγγελίες και παρακολουθήστε την κατάσταση αποστολής
  • Δημιουργήστε μια λίστα με τα προϊόντα σας για να έχετε πρόσβαση σε αυτή
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Είσοδος Δημιουργήστε έναν λογαριασμό Είσοδος στο Premier Είσοδος στο Πρόγραμμα συνεργατών
Επικοινωνία

Inspiron 14 3000 Service Manual

PDF

Procedure

  1. Remove the screws that secure the palm-rest assembly to the computer base.
  2. Lift the latches and disconnect the touch-pad cable and power-button cable from the system board.
    Image: Removing the palm rest
    1. power-button cable
    2. screws (5)
    3. palm-rest assembly
    4. computer base
    5. touch-pad cable
    6. latches (2)
  3. Close the display and turn the computer over.
  4. Remove the screws that secure the palm-rest assembly to the computer base.
  5. Disconnect the speaker cable from the system board.
    Image: Removing the palm rest
    1. screws (8)
    2. computer base
    3. speaker cable
  6. Lift the computer base and pry the palm-rest assembly off the computer base using a plastic scribe.
    Image: Removing the palm rest
    1. computer base
    2. palm-rest assembly
    3. plastic scribe
  7. Turn the computer over and open the display as far as possible.
  8. Lift the palm-rest assembly at an angle and remove it from the computer base.
    Image: Removing the palm rest
    1. palm-rest assembly
    2. computer base
  9. Follow the procedure from step 1 to step 6 in “ Removing the touch pad ”.
  10. Follow the procedure from step 1 to step 4 in “ Removing the power-button board ”.
  11. Follow the procedure from step 1 to step 4 in “ Removing the speakers”.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\