XPS 8910 Service Manual

Procedure

1. Disconnect the top I/O-panel cables from the system board.
   For more information, see "System-board components”.
2. Note the I/O-panel cables routing and remove them from the routing guides next to the system board on the chassis.
3. Remove the cables through the slot at the top of the chassis.

   

   1. I/O-panel cables (2)
   2. routing guide
   3. chassis
   4. top I/O panel bracket

4. Remove the screws that secure the top I/O-panel to the chassis.
5. Lift the top I/O-panel bracket from the chassis.

   

   1. #6-32x1/4'' (4)
   2. top I/O-panel bracket
   3. chassis