Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerEdge R320 Systems Owner's Manual

Expansion Card Installation Guidelines

Your system supports two PCI Express expansion cards.

The following PCI Express Generation 2 and 3 expansion cards are supported.

Table 1. Supported Expansion Cards
Riser PCIe Slot Generation Height Length Link Width Slot Width
1 1 2 Low Profile Half Length x4 x8
2 2 3 Standard Height Half Length x16 x16
  • NOTE: The expansion-card slots are not hot-swappable.

The following table provides guidelines for installing expansion cards to ensure proper cooling and mechanical fit. The expansion cards with the highest priority should be installed first using the slot priority indicated. All other expansion cards should be installed in card priority and slot priority order.

Table 2. Expansion-Card Installation Order
Card Priority Card Type Height Slot Priority Max Allowed Per Slot
1 Integrated RAID   Integrated Slot 1
2 RAID Standard Height Slot 2 (Riser 2) 1
3 Converged Network Adapters (CNAs) Standard Height Slot 2 (Riser 2) 1
    Low Profile Slot 1 (Riser 1) 1
4 10 Gb NICs Standard Height Slot 2 (Riser 2) 1
    Low Profile Slot 1 (Riser 1) 1
5 FC8 HBA Standard Height Slot 2 (Riser 2) 1
    Low Profile Slot 1 (Riser 1) 1
6 FC4 HBA Standard Height Slot 2 (Riser 2) 1
    Low Profile Slot 1 (Riser 1) 1
7 1 Gb NICs Standard Height Slot 2 (Riser 2) 1
    Low Profile Slot 1 (Riser 1) 1
8 Non-RAID Standard Height Slot 2 (Riser 2) 1

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\