Dell Chassis Management Controller Version 1.3 for PowerEdge FX2/FX2s User's Guide

PDF

Accessing CMC web interface

Before you log in to CMC using the web interface, make sure that you have configured a Supported Web Browser and the user account is created with the required privileges.

NOTE: If you are using Microsoft Internet Explorer, connect using a proxy, and if you see the error The XML page cannot be displayed, you must disable the proxy to continue.

To access the CMC web interface:

Open a web browser supported on your system. For the latest information on supported web browsers, see the Dell Systems Software Support Matrix located at dell.com/support/manuals.
In the Address field, type the following URL, and then press <Enter>:
- To access CMC using IPv4 address: https://<CMC IP address>
  If the default HTTPS port number (port 443) was changed, type: https://<CMC IP address>:<port number>
- To access CMC using IPv6 address: https://[<CMC IP address>]
  If the default HTTPS port number (port 443) was changed, type: https://[<CMC IP address>]:<port number>, where <CMC IP address> is the IP address for CMC and <port number> is the HTTPS port number.
  
  The CMC Login page appears.
- NOTE: While using IPv6, you must enclose the CMC IP address in parenthesis ([ ]).