Dell Chassis Management Controller Version 1.3 for PowerEdge FX2/FX2s User's Guide

PDF

Configuring chassis management at server mode using RACADM

To enable the Chassis Management at server using RACADM, use the following commands:

To disable Chassis Management at Server mode, use:

racadm config –g cfgRacTuning – cfgRacTuneChassisMgmtAtServer 0

To change Chassis Management at Server mode to monitor, use:

racadm config –g cfgRacTuning – cfgRacTuneChassisMgmtAtServer 1

To change Chassis Management at server mode to manage and monitor, use:
```
racadm config –g cfgRacTuning – cfgRacTuneChassisMgmtAtServer 2
```