Dell Command | Monitor Version 9.1 Reference Guide

PDF

DCIM_VirtualDiskView

Property	Description
ElementName	A user-friendly name for the object. This property allows each instance to define a user-friendly name in addition to its key properties, identity data, and description information. NOTE: The Name property of ManagedSystemElement is also defined as a user-friendly name. But, it is often sub-classed to be a Key. It is not reasonable that the same property can convey both identity and a user-friendly name, without inconsistencies. Where Name exists and is not a Key (such as for instances of LogicalDevice), the same information can be present in both the Name and ElementName properties.
InstanceID	The property contains the value of the Fully Qualified Device Description (FQDD).
PrimaryStatus	This property represents the status of the device. Possible values are: 0 = Unknown 1 = OK 2 = Degraded 3 = Error 4 = Rebuilding 5 = Offline
RAIDStatus	This property represents the RAID specific status. Possible values are: 0 = Unknown 1 = Ready 2 = Online 3 = Foreign 4 = Offline 5 = Blocked 6 = Failed 7 = Degraded 8 = Rebuilding
RAIDTypes	This property represents the current RAID level. Possible values are: 1 = No RAID 2 = RAID-0 4 = RAID-1 64 = RAID-5 128 = RAID- 6 2048 = RAID-10 8192 = RAID-50 16384 = RAID- 60
SizeinMegabytes	The property represents the size of the virtual disk in megabytes.
StripeSize	This property represents the current strip size. Possible values are: 0 = Default 1 = 512Bytes 2 = 1KB 4 = 2KB 8 = 4 KB 16 = 8 kB 32 = 16 KB 64 = 32 KB 128 = 64 KB 256 = 128 KB 512 = 256 KB 1024 = 512 KB 2048 = 1 MB 4096 = 2 MB 8192 = 4 MB 16384 = 8 MB 32768 = 16 MB
PhysicalDiskIDs	The property represents the array of physical disk FQDDs.