Dell PowerVault MD3060e Storage Enclosure Owner's Manual

PDF

Power Supply Module Features And Indicators

NOTE: Your storage enclosure is shipped with two IEC C19 to C20 jumper cords. Connect the C19 plug to the enclosure’s power supplies and the C20 plug to the power distribution unit (PDU) in the rack cabinet.

Figure 1. Power Supply Module Features and Status Indicators The figure shows power supply module features and indicators.

Item

Indicator or Connector

Icon

Description

Power connector

Connect the external power supply source to this connector.

Power switch

The power switch controls the power supply output to the system.

Standby power indicator

The standby power indicator lights green when the system is in standby mode and the main power is off.

DC power indicator

Green	Indicates that DC output voltage is within the limit.
Off	Indicates that DC output voltage is not within the limit.

Service action allowed indicator

CAUTION: Remove the power supply module from the system only if the Service action allowed indicator lights blue. Removing the power supply module from the system when the Service action allowed indicator is off may damage the system.

NOTE: The Service action allowed indicator LED is not used in server attached configurations.

Blue	Indicates that you can safely remove the power supply module from the system.
Off	Indicates that you cannot remove the power supply module from the system.

Service action required indicator

The service action required indicator lights amber when there is a fault in the power supply module.

AC power indicator

Green	Indicates that AC output voltage is within the limit.
Off	Indicates that AC output voltage is not within the limit.