Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

To get general route, configuration, links status, and debug information, use the following commands.

• View the summary information of the IPv6 routes. EXEC Privilege mode show ipv6 route summary
• View the summary information for the OSPFv3 database. EXEC Privilege mode show ipv6 ospf database
• View the configuration of OSPFv3 neighbors. EXEC Privilege mode show ipv6 ospf neighbor
• View debug messages for all OSPFv3 interfaces. EXEC Privilege mode debug ipv6 ospf [event | packet] {type slot/port}
  • event: View OSPF event messages.
  • packet: View OSPF packets.
  • For a Gigabit Ethernet interface, enter the keyword GigabitEthernet then the slot/port information (for example, passive-interface gi 2/1).
  • For a port channel, enter the keywords port-channel then a number from 1 to 255.
  • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information (for example, passive-interface ten 2/3).
  • For a VLAN, enter the keyword vlan then a number from 1 to 4094 (for example, passive-interface vlan 2222 ). The system supports 4094 VLANs.