Latitude 3180 Owner's Manual

Removing display assembly

1. Follow the procedure in Before working inside your computer.
2. Remove the:
   1. microSD card
   2. base cover
   3. battery
3. To remove display cable:
   1. Remove the screws M2.0x3.0 and lift the metal bracket that secures the display cable on the computer [1, 2].
   2. Lift the latch, and disconnect the display cable on the system board [3].
   
4. To disconnect WLAN cable:
   1. Remove the screw M2.0x3.0 and lift the metal bracket that secure the WLAN card on the system board [1, 2].
   2. Disconnect the WLAN cables [3].
   3. Turn over the computer [4].
   
5. To remove the display assembly:
   1. Remove the display hinge screws M2.5xM5.0 that secure the display assembly to the computer [1].
   2. Lift the display assembly away from the computer [2].