-
The switches must be specified first in a command line installation. Other parameters go inside an argument that is passed to the /v switch.
Switches
-
The following table describes the switches that can be used with the
Endpoint Security Suite Enterprise
master installer.
NOTE:If your organization requires the use of third-party credential providers, the Encryption Management Agent must be installed or upgraded with the FEATURE=BLM or FEATURE=BASIC parameter.
Switch
|
Description
|
/s
|
Silent installation
|
/z
|
Pass variables to the .msi inside the
DDSSuite.exe
|
Parameters
-
The following table describes the parameters that can be used with the
Endpoint Security Suite Enterprise
master installer.
The
Endpoint Security Suite Enterprise master installer cannot exclude individual components but can receive commands to specify which components should be installed.
Parameter
|
Description
|
SUPPRESSREBOOT
|
Suppresses the automatic reboot after the installation completes. Can be used in SILENT mode.
|
SERVER
|
Specifies the URL of the
Dell Server.
|
InstallPath
|
Specifies the path for the installation. Can be used in SILENT mode.
|
FEATURES
|
Specifies the components that can be installed in SILENT mode.
ATP =
Advanced Threat Prevention
only
DE-ATP =
Advanced Threat Prevention and Encryption. This is the default installation option if the FEATURES parameter is not specified
DE = Drive Encryption client only
BLM =
BitLocker Manager
SED = SED Manager (Encryption Management Agent/Manager, PBA/GPE Drivers)(Available only when installed on a workstation operating system)
ATP-WEBFIREWALL =
Advanced Threat Prevention with Client Firewall and Web Protection
DE-ATP-WEBFIREWALL = Encryption and
Advanced Threat Prevention with Client Firewall and Web Protection
NOTE:For upgrades from
Encryption Enterprise or from pre-v1.4
Endpoint Security Suite Enterprise, ATP-WEBFIREWALL or DE-ATP-WEBFIREWALL
must be specified in order to install Client Firewall and Web Protection. Do not specify ATP-WEBFIREWALL or DE-ATP-WEBFIREWALL when installing a client to be managed by
Dell Server running in Disconnected mode.
|
BLM_ONLY=1
|
Must be used when using FEATURES=BLM in the command line to exclude the SED Manager plugin.
|
Example Command Line
- Command line parameters are case-sensitive.
-
(On a workstation operating system)
This example installs all components using the
Endpoint Security Suite Enterprise
master installer on standard ports, silently, in the default location of
C:\Program Files\Dell\Dell Data Protection\, and configures it to use the specified
Dell Server.
"DDSSuite.exe" /s /z"\"SERVER=server.organization.com\""
-
(On a workstation operating system) This example installs
Advanced Threat Prevention and Encryption
only using the
Endpoint Security Suite Enterprise master installer on standard ports, silently, in the default location of
C:\Program Files\Dell\Dell Data Protection\, and configures it to use the specified
Dell Server.
"DDSSuite.exe" /s /z"\"SERVER=server.organization.com, FEATURES=DE-ATP\""
-
(On a workstation operating system) This example installs
Advanced Threat Prevention, Encryption, and SED Manager using the
Endpoint Security Suite Enterprise master installer on standard ports, silently, with a suppressed reboot, in the default location of
C:\Program Files\Dell\Dell Data Protection\, and configures it to use the specified
Dell Server.
"DDSSuite.exe" /s /z"\"SERVER=server.organization.com, FEATURES=ATP-SED, SUPPRESSREBOOT=1\""
-
(On a workstation operating system) This example installs
Advanced Threat Prevention, Encryption, Web Protection, and Client Firewall using the
Endpoint Security Suite Enterprise master installer on standard ports, silently, in the default location of
C:\Program Files\Dell\Dell Data Protection\, and configures it to use the specified
Dell Server.
"DDSSuite.exe" /s /z"\"SERVER=server.organization.com, FEATURES=ATP-WEBFIREWALL\""
-
(On a server operating system) This example installs
Advanced Threat Prevention and Encryption
only using the
Endpoint Security Suite Enterprise master installer on standard ports, silently, in the default location of
C:\Program Files\Dell\Dell Data Protection\, and configures it to use the specified
Dell Server.
"DDSSuite.exe" /s /z"\"SERVER=server.organization.com, FEATURES=DE-ATP\""
-
(On a server operating system) This example installs
Advanced Threat Prevention, Encryption, Web Protection, and Client Firewall using the
Endpoint Security Suite Enterprise master installer on standard ports, silently, in the default location of
C:\Program Files\Dell\Dell Data Protection\
"DDSSuite.exe" /s /z"\"SERVER=server.organization.com, FEATURES=DE-ATP-WEBFIREWALL\""
-
(On a server operating system) This example installs
Advanced Threat Prevention
only using the
Endpoint Security Suite Enterprise master installer on standard ports, silently, in the default location of
C:\Program Files\Dell\Dell Data Protection\, and configures it to use the specified
Dell Server.
"DDSSuite.exe" /s /z"\"SERVER=server.organization.com, FEATURES=ATP\""
-
(On a workstation operating system) This example installs
Advanced Threat Prevention, BitLocker Manager, and Web Protection using the
Endpoint Security Suite Enterprise master installer on standard ports, silently, with a suppressed reboot, in the default location of
C:\Program Files\Dell\Dell Data Protection\, and configures it to use the specified
Dell Server.
"DDSSuite.exe" -y -gm2 /S /z"\"SERVER=server.domain.com, FEATURES=BLM-ATP-WEBFIREWALL, SUPPRESSREBOOT=1, BLM_ONLY=1\""
-
(On a server operating system) This example installs Encryption
only using the
Endpoint Security Suite Enterprise master installer on standard ports, silently, in the default location of
C:\Program Files\Dell\Dell Data Protection\, and configures it to use the specified
Dell Server.
"DDSSuite.exe" /s /z"\"SERVER=server.organization.com, FEATURES=DE\""