Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Endpoint Security Suite Enterprise Technical Advisories v3.9

PDF

Technical Advisories v3.2

Advanced Threat Prevention v3.2

  • No technical advisories exist.

Firewall and Web Protection v3.2

  • No technical advisories exist.

Encryption Client v11.2

  • After running WSDeactivate on a computer, a message incorrectly displays and prompts for restart as a result of a Windows 10 upgrade. This message should be ignored. [DDPC-12755]
  • If a computer crash occurs before Dell Encryption activates, the vault is corrupted and automatic repair is not attempted. As a workaround, run WSDeactivate on the affected computer. [DDPC-12779]
  • WinPE run on Windows 11 does not automatically mount the target disk. As a workaround, use the following steps:
    1. Type x and press Enter to exit to Command line.
    2. To open the Diskpart utility, type diskpart and press Enter.
    3. Type list vol and press Enter to list the available volumes.
    4. Type select volume x where x is the volume number.
    5. Use the assign command to assign a drive letter to that volume. For example, assign C and press Enter.
    6. Type exit to leave Diskpart.

    The target disk is mounted, and recovery can be performed. [DDPC-12848]

Pre-boot Authentication v3.2

  • Dell platform BIOS from mid-2020 and earlier may not align with EFI-based certificate handling recently updated by Microsoft. This may result in the Dell Pre-boot Authentication environment failing to boot. To work around this incompatibility, ensure that the BIOS on your computer is updated. For more information, see this KB article 129365. [DDPC-12834]

SED Manager v3.2

  • No technical advisories exist.

Full Disk Encryption v3.2

  • Dell platform BIOS from mid-2020 and earlier may not align with EFI-based certificate handling recently updated by Microsoft. This may result in the Dell Pre-boot Authentication environment failing to boot. To work around this incompatibility, ensure that the BIOS on your computer is updated. For more information, see this KB article 129365. [DDPC-12834]

BitLocker Manager v3.2

  • No technical advisories exist.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\