Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Security Management Server Virtual Quick Start and Installation Guide v11.9

Backup and Restore

Backups can be configured or performed at any time and are not required to begin using Security Management Server Virtual. Dell recommends that you configure a regular backup process. For more information see http://www.dell.com/support/article/us/en/19/sln304943/how-to-back-up-and-restore-dell-security-management-server-virtual-dell-data-protection-virtual-edition?lang=en

When stored on the Dell Server and the disk is at 90 percent capacity, no new backups are stored. If email notifications have been configured, you will receive an email notification that disk allocation space is low.

NOTE:

To preserve disk partition space and prevent automatic deletion of backups, remove unnecessary backups from storage.

Backups are run daily, by default. Dell recommends storing backups to an external secure FTP server at a frequency that meets requirements of the organization for backups and appropriate use of storage space.

To configure a backup schedule, from the Advanced Configuration menu, select Backup and Restore > Configuration and follow these steps:

  1. To enable daily, weekly, or monthly backups, use the space bar to enter an X in the appropriate field. For weekly or monthly backups, enter the appropriate day of the week or month as a numeral, where Monday=1. To disable backups, use the space bar to enter an X inNo backups and select OK.

  2. Enter a time for backup in Backup Time.

  3. Select OK.

To perform an immediate backup, from the Advanced Configuration menu, select Backup and Restore > Backup now. When the backup confirmation displays, select OK.

NOTE:

Before beginning a restore operation, all Dell Server services must be running. Check Server Status. If all services are not running, restart the services. For more information, see Start or Stop Services. Begin to restore only when all services are running.

To restore from a backup, from the Advanced Configuration menu, select Backup and Restore > Restore then select the backup file to be restored. At the confirmation screen select Yes.

The backup is restored after reboot.

Store backups to a secure FTP server

To store backups to an FTP server, the FTP client must support SFTP on port 22.

According to backup requirements of the organization, backups can be downloaded in the following ways:

  • Manually

  • Through automated script

  • Through the organization's approved backup solution

To download backups using the organization's backup solution, obtain detailed instructions from your backup solution vendor.

NOTE:

The Dell Server is based on Linux Debian Ubuntu x64.

Log on to the Dell Server as dellsupport, and use the sudo command to configure your backup solution:

sudo <instructions from backup solution vendor>

Back up contents of the following folders:

/backup (required)

/certificates (strongly recommended)

/support (optional)

When the sudo process is complete, type exit and press Enter until the login prompt displays.


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\