Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell PowerEdge FX2 and FX2s Enclosure Owner's Manual

PDF

Installing the KVM panel

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
NOTE: This is a field replaceable unit (FRU). Removal and installation procedures must be performed only by Dell certified service technicians.
  1. Ensure that you read the Safety instructions.
  2. Follow the procedure listed in Before working inside your system.
  3. Remove the KVM panel.
    NOTE: You must remove the KVM panel to replace a faulty panel.

Steps

  1. Connect the KVM panel cable to the KVM panel.
  2. Press the connector latch into place.
  3. Install the screw to secure the KVM panel cover to the KVM panel.
  4. Align the screw holes on the KVM panel with the screw holes on the side of the system.
  5. Install the two screws to secure the KVM panel to the side of the system.
  6. Insert the KVM panel cable in the cable tube.
  7. Align the screw holes on the cable tube with the screw holes on the side of the system.
  8. Install the three screws to secure the cable tube to the side of the system.

Next steps

Follow the procedure listed in After working inside your system.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\