Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In

Active System Manager Release 8.1.1 User’s Guide

PDF

VLT Enabled

VLT is a cross switches on chassis. This is a special interconnect (i.e. port-channel/grouping of ports) between two peer switches.

VLT is mainly enabled for make redundancy. If one network fail, redundant network can be used to avoid facing complete network traffic fail.

If you enable VLT, you can select VLT from port drop down menu. Same should be selected in corresponding port , so that it can corrospondent port to port.

It is not mandatory to have VLT.

  • NOTE: For FX2, VLT should be selected only from port 9 drop-down menu and you also must select that correspondent port for VLT.
  • NOTE: For M1000E chassis, we can select either VLT or Uplink from any of the port but it has to match port-to-port. VLT is available for I/0-Agregator port but not for MXL ( M100e Chassis).
Related concepts

I/O Module Configuration

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\