Dell PowerEdge VRTX Enclosure Owner's Manual

Configuring a server module

NOTE: Follow this procedure to install server modules that are not configured for the VRTX enclosure.

NOTE: If you install server modules that are not configured for the VRTX enclosure, an error message is displayed.

To configure a server module for the VRTX enclosure:

Open the server module.
For more information about opening a server module, see the server module Owner's Manual at Dell.com/poweredgemanuals.
Remove any mezzanine cards installed in Fabric B and Fabric C slots of the server module.
Install PCIe Mezzanine cards in the vacant Fabric B and Fabric C slots.
For more information about installing the PCIe Mezzanine cards, see the server module Owner's Manual at Dell.com/poweredgemanuals.
Ensure that no tools or parts are left inside the server module.
Slide the cover on the server module until it clicks into position.
A properly seated cover is flush with the surface of the server module chassis.
Install the latest iDRAC Enterprise license. For more information, see the iDRAC7 User's Guide, at Dell.com/idracmanuals.