Integrated Dell Remote Access Controller 8 (iDRAC8) Version 2.00.00.00 RACADM Command Line Interface Reference Guide

racadm jobqueue view -i<jobid>

racadm jobqueue delete [-i<jobid>][--all]

racadm jobqueue create <fqdd> [-r <reboot type> ] [-s <start time> ] [-e <expiry time>] 

racadm jobqueue create <fqdd> [-r <reboot type>] [-s <start time>] [-e <expiration time>] [--realtime]

• -i — Specifies a job ID that is displayed or deleted.
  • NOTE: The value JID_CLEARALL will force delete all the possible jobs in the queue.
• --all — The job IDs that are not applicable are deleted.
• -fqdd — Specifies an FQDD for which a job should be created.
• —r <reboot type> — Specifies a reboot type.
  • none — No Reboot Job. This option is the default value.
  • pwrcycle — Power cycle.
  • graceful — Graceful Reboot without forced shut down.
  • forced — Graceful Reboot with forced shut down.
• start time — Specifies a start time for job scheduled in yyyymmddhhmmss format. TIME_NOW means immediate. Next Reboot means job is in scheduled state until the next manual restart.
• expiry time — Specifies expiry time for the job execution in yyyymmddhhmmss format. TIME_NA means expiry time is not applicable.
• --realtime — Specifies the real time job.
  • NOTE:

    • --realtime is applicable for storage configuration commands run on systems with PERC 9 cards with firmware version 9.1 and later.

    • -r option is not valid for real time configuration.

• View jobs in the current job queue.

  racadm jobqueue view

• View jobs in the Current job queue and display the specific job ID.

  racadm jobqueue view -i <JobID>

• Delete all possible jobs from the current job queue.

  racadm jobqueue delete --all

• Delete a specific job from the current job queue.

  racadm jobqueue delete -i <JobID>

• To clear all the jobs in the job queue.

  racadm jobqueue delete –i JID_CLEARALL

• Create a Job for the provided FQDD and add to the job queue.

  racadm jobqueue create NIC.Integrated.1-1 -r pwrcycle -s TIME_NOW -e 20120501100000

• Create a real time configuration job for the specified RAID controller.

  racadm jobqueue create RAID.Integrated.1-1 -s TIME_NOW --realTime
                                                        RAC1024: Successfully scheduled a job.
                                                        Verify the job status using "racadm jobqueue view -i JID_xxxxx" command.
                                                        Commit JID = JID_927008261880