- Notes, Cautions, and Warnings
- Before working inside your computer
- After working inside your computer
- Removing the base panel
- Replacing the base panel
- Removing the memory modules
- Replacing the memory modules
- Removing the solid-state drives
- Replacing the solid-state drives
- Removing the hard drive
- Replacing the hard drive
- Removing the wireless card
- Replacing the wireless card
- Removing the palm rest
- Replacing the palm rest
- Removing the power-button board
- Replacing the power-button board
- Removing the status-light board
- Replacing the status-light board
- Removing the keyboard
- Replacing the keyboard
- Removing the touch pad
- Replacing the touch pad
- Removing the display assembly
- Replacing the display assembly
- Removing the battery
- Replacing the battery
- Removing the I/O board
- Replacing the I/O board
- Removing the speakers
- Replacing the speakers
- Removing the front AlienFX LED boards
- Replacing the front AlienFX LED board
- Removing the processor fan
- Replacing the processor fan
- Removing the system board
- Replacing the system board
- Removing the heat sink
- Replacing the heat sink
- Removing the coin-cell battery
- Replacing the coin-cell battery
- Removing the video-card fan
- Replacing the video-card fan
- Removing the power-adapter port
- Replacing the power-adapter port
- Removing the subwoofer
- Replacing the subwoofer
- Removing the display bezel
- Replacing the display bezel
- Removing the display panel
- Replacing the display panel
- Removing the display hinges
- Replacing the display hinges
- Removing the computer base
- Replacing the computer base
- Removing the logo board
- Replacing the logo board
- Removing the camera
- Replacing the camera
- Removing the display-panel AlienFX LEDs
- Replacing the display-panel AlienFX LEDs
- Removing the Alienware AlienHead LED board
- Replacing the Alienware AlienHead LED board
- Removing the display back-cover
- Replacing the display back-cover
- BIOS setup program
- Flashing the BIOS
- Getting help and contacting Alienware
Alienware 17 R2 Service Manual
Procedure
- Using the alignment posts on the computer base, slide and place the processor fan on the computer base.
- Align the screw holes on the processor fan with the screw holes on the computer base.
- Adhere the Mylar on the processor fan and processor heat-sink.
- Replace the screws that secure the processor fan to the computer base.
- Close the display and turn the computer over.
- Connect the processor-fan cable to the system board.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\